| ABS PA-797 通用级 | ||||
| 特性：耐药品级，耐HCFC，射出成型 | ||||
| 应用：冰箱把手及零组件 | ||||
| 物性指标 | ||||
| 特性 | 测试方法 | 测试条件 | 单位 | 数值 |
| 引张强度 | ASTM D638 | 1/8″，6mm/min | Kg/cm2(lb/in2) | 420(5970) |
| Tensile Strength | ||||
| 延伸率 | ASTM D638 | 1/8″，6mm/min | % | 50 |
| Tensile Elongation | ||||
| 弯曲强度 | ASTM D790 | 1/4″,2.8mm/min | Kg/cm2(lb/in2) | 610（8635） |
| Flexural Strength | ||||
| 弯曲弹性率 | ASTM D790 | 1/4″,2.8mm/min | Kg/cm2(lb/in2) | 20500(288519) |
| Flexural Modulus | ||||
| Izod冲击强度 | ASTM D256 | 1/4″,23℃ | Kg.cm/cm | 27（5.0) |
| Izod Impact Strength | (Notched) | 1/8″, 23℃ | (ft.lb/in) | 40（7.5) |
| 流动系数 | ASTM D1238 | 200℃,5Kg | g/10min | 1 |
| Melt Flow Index | ||||
| 硬度 | ASTM D785 | 1/2″ | R Scale | 108 |
| Hardness | ||||
| 比重 | ASTM D792 | 23℃ | - | 1.05 |
| Specific Gravity | ||||
| 软化点 | ASTM D1525 | 1/8″,50℃/hr | ℃( ? ) | 105.5(222) |
| Vicat Softening Temp | ||||
| 热变形温度 | ASTM D648 | 1/4″, 120℃/hr | ℃( ? ) | 97(207) |
| HDT | 86(187) | |||
| 燃烧率 | UL94 | - | - | 1/6″HB |
| Flammability | ||||
